近期，曼尼通（Manitou）推出了一系列新的伸缩臂叉装车，并且还将推出纯电动或混合动力的伸缩臂叉装车系列。

新的MT紧凑型系列包括两种型号，工作高度分别为7米和9米，专为狭窄的区域设计，其宽高为2m x 2m，9米机型可用于3楼的施工。

其最新的叉头系统可以折叠起来，使机器长度缩短至4.67米，便于运输。 而且9米机型的重量也不到3吨。此外，新机型具有35厘米的离地间隙和3.3米的转向半径，并采用静液压传动。

MT机型采用新的用户友好型仪表板，具有22种语言选择。新的操纵杆传感器系统会自动停止危险行为，并在臂杆上升或在未系紧安全带的情况下操作时发出警报。还有一种新的清洁油解决方案，用于监控液压系统。

附加的停止/启动解决方案可以在设备不使用时自动关闭发动机，并在操作员触摸操纵杆时重新启动发动机。

曼尼通的另一款产品是超轻型ULM系列。ULM机型重27,000公斤，宽1.4米，高1.9米，是世界上最小的伸缩臂叉装车。 ULM机型采用四轮驱动和可摆动的后轴，并且将与所有曼尼通属具兼容。

曼尼通的新MRT Vision和Vision +系列产品具有许多更新功能和新的外观。 Vision系列完全替代了以前的MRT系列达到了Stage V排放标准。

Vision系列有14种型号，高度从16米到25米不等，最大承重量为4.5吨。

Vision +系列有12种新型号，举升高度范围从22米到35米，具有高达7吨的举升能力。

曼尼通称，升级后的机型最大起升高度为25米，最大起升能力为7吨，与以前的MRT系列相比，最大高度的起重量最多可提高100％，最大工作范围时的起重量最多可提高20％。 MRT系列的重量最多减轻了5％，而举升能力却提高了15％。

新系列产品的行驶速度为40 km / h，油耗降低了10％。该公司表示，新系列的动作速度提升了30%。

曼尼通还计划推出全系列混合动力和电动版本的伸缩臂叉装车。

原文如下：

Manitou launches telehandler lines

By Euan Youdale

Manitou has launched a range of new telehandlers, including a pair of compact MT units, the new Vision and Vision Plus versions of its MRT rotating telehandlers and the ultra lightweight ULM series. The company also promises to make its entire telehandler range available with full electric or hybrid-powered options

The new MT compact range consists of two models, offering 7m and 9m working heights. Designed for particularly narrow areas such paths, gates and garage doors, the models are 2m wide x 2m high, yet can still reach the third floor of a building using the 9m model.

Its updated fork head system means the forks can be folded in for transport, bringing the machine length down to 4.67m. The 9m model weighs in at less than 3 tonnes, which also aids transport. In addition they offer 35cm ground clearance and 3.3m turning radius, plus hydrostatic transmission.

The MT units also boast a new user-friendly dashboard, with notifiCATions in 22 languages. A new joystick sensor system automatically stops risky behaviour and alerts the site manager if the machine is being driven with the boom up or without the seatbelt fastened. There is also a new clean oil solution that monitors the hydraulic system.

An additional stop/start solution automatically stops the engine when not in use and restarts it when the operator touches the joystick.

Another launch from Manitou is the Ultra Light Manitou (ULM) range of very compact telehandlers that can be towed on a standard trailer behind a car, making them useful for DIY, for example. 

The 27,000kg machines are 1.4m wide and 1.9m high, which makes them the world’s smallest telehandlers, claims Manitou. The ULMs will offer four wheel drive and oscillating rear axles, and will be compatible with all Manitou attachments once testing has been completed.

Manitou’s new MRT Vision and Vision+ range provides a new look machine with a number of updated features. The Vision range completly replaces the previous MRT models to meet Stage V emission standards.

The Vision series offers 14 models with heights ranging from 16m to 25m, for a load capacity of up to 4.5 tonnes. It expands the previous MRT offering in this working height area by two models: the MRT 1645 and MRT 1845.

The highest capacities are grouped together in the Vision+ range, which features 12 new models, including six more models than the MRT range’s previous offering: the MRT 2260, MRT 2660, MRT 3570, MRT 2570 and MRT 3060. Lifting heights range from 22m to 35m and offer a much  improved capacity of up to 7 tonnes. 

The cab has been designed to offer full access on both sides and direct access to the ladder. In addition, there are no roof bars on the Vision Plus versions, adding to the improved visibility. The models also add a larger dashboard with a bigger touchscreen.

According to Manitou the uprated models, which range up  to 25m lifting heights and up to 7 tonnes lifting capacities, can offer up to 100% more capacity at full height than the pre-existing MRT range, and 20% more capacity at maximum outreach. The weight of the MRTs have been reduced by up to 5%, while increasing lift capabilities by up to 15%.

Travel speed of the updated series is 40km/h and fuel consumption is reduced by 10%. The company says the new range also offers 30% faster speed of movement.

Manitou said it is also planning to launch hybrid and electric versions of its full range of telehandlers as part of its recently announced 2025 strategic roadmap, which includes a greater focus on sustainability and a move towards zero emission worksites. The plans also include a move into hydrogen. 

More information on all these products will be announced soon.

https://www.accessinternational.media/news/manitou-launches-telehandler-lines/8011781.article