Skyjack推出了70英尺（21.34米）工作高度的越野剪叉式高空作业平台SJ9664 RT。
Skyjack产品经理Kristopher Schmidt表示，“我们研究了北美ANSI和欧洲Stage V的标准要求，并深入研究了如何为客户开发全新的产品。新推出的工作高度为70英尺的机器使七层楼的工作成为可能。”
SJ9664 RT采用基于车轴的四轮驱动系统和Skyjack的智能扭矩（Smartorque）技术，具有宽敞的工作空间和较高的作业能力。
Skyjack的智能扭矩功能使其可以使用更小的Tier 4 Final标准的久保田发动机，而且可以发挥与更高功率设备相同的性能。
SJ9664 RT还采用增强的剪叉结构、简化的电子升降装置、机载诊断显示器、自定心剪叉设计，可选装双扩展甲板。
与所有Skyjack新一代产品一样，SJ9664 RT也可以选装Elevate远程信息处理解决方案。使用此解决方案，操作员可以查看发动机故障和其他机器运行状况的指标。
原文如下：
Skyjack introduces 70ft RT scissor
By Euan Youdale
Skyjack has introduced a 70ft (21.34m) working height rough terrain scissor lift.
The SJ9664 RT represents an enhancement of prototypes introduced last year, and was part of the manufacturer’s Skyworld product launch week, which took place at the end of February.
Skyjack SJ9664 RT
Skyjack’s 70ft working height SJ9664 rough terrain scissor
“Similar to our DC scissor lifts, we looked at what changes were mandated by standards, both ANSI in North America and Stage V in Europe, and dug a bit deeper to see how we could develop a whole new class for our customers,” explained Kristopher Schmidt, product manager at Skyjack. “Bringing a machine to the market with a working height of 70ft makes work at seven stories possible without jumping to a specialised class.”
The SJ9664 RT’s features include an axle-based four-wheel drive system, Skyjack’s Smartorque technology, a large workspace and impressive capacities.
Skyjack’s Smartorque enables the SJ9664 RT to use a smaller Tier 4 Final Kubota engine, while delivering the same on-site performance as higher powered units.
“With this optimised balance of engine horse power, torque, and hydraulic performance, we’ve created a cost-effective solution for emission regulations and controls,” Schmidt explained. “Other areas we’ve added value to our customers are through the commonality of parts across our other full-size RT scissors, impact-resistant control box, and increased leveling capability with better protected components.”
The SJ9664 RT also includes a reinforced scissor stack, simplified e-lowering, onboard diagnostic display, a self-centering scissor design, which supports the optional dual extension decks, and it is compatible with Skyjack’s Accessoryzers line, including pipe rack and material handling stand.
Like all Skyjack Next Generation products, the SJ9664 RT is supported by the manufacturer’s optional Elevate telematics solution. Using this solution, operators can see engine faults and other machine health metrics through the Elevate Live QR code system.
Source：https://www.khl.com/news/skyjack-introduces-70ft-rt-scissor/8010664.article
